Abstract
This document describes an XML encoding standard for metadata about IVOA standards themselves, referred to as StandardsRegExt. It is intended to allow for the discovery of a standard via an IVOA identifier that refers to the standard. It also allows one to define concepts that are defined by the standard which can themselves be referred to via an IVOA identifier (augmented with a URL fragment identifier). Finally, it can also provide a machine interpretable description of a standard service interface. We describe the general model for the schema and explain its intended use by interoperable registries for discovering resources.Preface
Status of this document
This is an IVOA Proposed Recommendation available for public review by all
interested parties. Comments on this document should be made via the IVOA
Request For Comment (RFC) Twiki page,
http://www.ivoa.net/cgi-bin/twiki/bin/view/IVOA/StandardsRegExt10RFC
or by via email to registry at ivoa.net. The
deadline comments can be found on the RFC page.
Pre-1.0 versions of this document were known as VOStandard.
A list of current IVOA Recommendations and other technical documents can be found at http://www.ivoa.net/Documents/.
Acknowledgements
This document has been developed with support from the National Science Foundation's Information Technology Research Program under Cooperative Agreement AST0122449 with The Johns Hopkins University, from the UK Particle Physics and Astronomy Research Council (PPARC), and from the European Commission's Seventh Framework Program.
This document contains text lifted verbatim, with small changes, and with substantial changes from the previously published VODataService specification [VDS] (e.g. sections 2.0). This has been done without specific attribution as a means for providing consistency across similar documents. We acknowledge the authors of that document for this text.
Conformance-related definitions
The words "MUST", "SHALL", "SHOULD", "MAY", "RECOMMENDED", and "OPTIONAL" (in upper or lower case) used in this document are to be interpreted as described in IETF standard, RFC 2119 [RFC 2119].
The Virtual Observatory (VO) is a general term for a collection of federated resources that can be used to conduct astronomical research, education, and outreach. The International Virtual Observatory Alliance (IVOA) is a global collaboration of separately funded projects to develop standards and infrastructure that enable VO applications.
XML document validation is a software process that checks that an XML document is not only well-formed XML but also conforms to the syntax rules defined by the applicable schema. Typically, when the schema is defined by one or more XML Schema [Schema] documents (see next section), validation refers to checking for conformance to the syntax described in those Schema documents. This document describes additional syntax constraints that cannot be enforced solely by the rules of XML Schema; thus, in this document, use of the term validation includes the extra checks that goes beyond common Schema-aware parsers which ensure conformance with this document.
Syntax Notation Using XML Schema
The eXtensible Markup Language, or XML, is document syntax for marking textual information with named tags and is defined by the World Wide Web Consortium (W3C) Recommendation, XML 1.0 [XML]. The set of XML tag names and the syntax rules for their use is referred to as the document schema. One way to formally define a schema for XML documents is using the W3C standard known as XML Schema [Schema].
This document defines the StandardsRegExt schema using XML Schema. The full Schema document is listed in Appendix A. Parts of the schema appear within the main sections of this document; however, documentation nodes have been left out for the sake of brevity.
Reference to specific elements and types defined in the VOResource
schema include the namespaces prefix, vr, as in
vr:Resource (a type defined in the VOResource schema).
Reference to specific elements and types defined in the StandardsRegExt
schema include the namespaces prefix, vstd, as in
vstd:ServiceStandard (a type defined in the StandardsRegExt schema).
Use of the vstd prefix in compliant instance documents is
strongly recommended, particularly in the applications that involve
IVOA Registries (see [RI], section 3.1.2).
Elsewhere, the use is not required.
Contents
- Abstract
- Status of this document
- Acknowledgments
- Conformance-related definitions
- Syntax Notation Using XML Schema
- 1. Introduction
- 2. The StandardsRegExt Data Model
- 3. The StandardsRegExt Metadata
- Appendix A: The StandardsRegExt XML Schema
- Appendix B: A Sample Record
- Appendix C: Change History
- References
1. Introduction
An important goal of the IVOA is to publish standards for services
which can interoperate to create a Virtual Observatory (VO). Central
to the coordination of these services is the concept of a registry
([RI]) where resources can be described and thus
discovered by users and applications in the VO. The standard
Resource
Metadata for the Virtual Observatory [Hanisch et
al. 2004] (hereafter referred to as RM) defines
metadata terms for services and other discoverable resources. A
specific XML encoding of these resources is described in the IVOA standard
VOResource:
an XML Encoding Schema for Resource Metadata [Plante
et al. 2006] (hereafter referred to as VOResource).
In this schema, support for a standard service protocol is described
as a service's capability; the associated metadata is
contained within the service resource description's
<capability> element. The
specific standard protocol supported is uniquely identified via an
attribute of the <capability> element called
standardID
whose value is a URI. The VOResource standard does
not place a formal validation requirement on the
standardID other than it be a legal URI; however, it
was intended that IVOA-endorsed standards would be represented via an
IVOA identifier. As per the IVOA Identifier standard
[ID], an IVOA identifier must be registered as a
resource in an IVOA-compliant registry.
This document defines a VOResource extension schema called StandardsRegExt which allows one to describe a standard and register it with an IVOA registry. By doing so, a unique IVOA identifier becomes "attached" to the standard which can be referred to in other resource descriptions, namely for services that support the standard. Not only does this aid in the unambiguous discovery of compliant service instances but also in validating their descriptions and support for the standard. Another benefit of associating an IVOA identifier with a standard is that it allows registry users who discover services that conform to a particular standard to also discover the document that describes that standard.
StandardsRegExt has two other purposes. First, it allows a service protocol description to communicate specifics about the standard input parameters and output formats specified by the standard. Such a machine-readable description of the interface can assist intelligent portals and applications to build GUI interfaces to standard services and manage workflows built around them. Second, it allows for the definition of small controlled sets of standardized names (referred to as keys in this document) which might be used to identify, for example, specific features of a standard protocol (such as supported data transport protocols). By virtue of being defined within the context of a VOResource description, one can refer to the key using a globally unique URI by adding the key name as a URI fragment [URI] onto the IVOA identifier associated with the descriptions.
It is envisaged that StandardsRegExt instances that describe standards
endorsed or otherwise in development by the IVOA will be published in
the IVOA Registry of Registries [RofR] using the
authority identifier [ID], ivoa.net.
However, other standards, be they ad hoc or endorsed by another
body, may be published in any compliant registry.
1.1. The Role in the IVOA Architecture
The IVOA Architecture [Arch] provides a high-level view of how IVOA standards work together to connect users and applications with providers of data and services, as depicted in the diagram in Fig. 1.
Figure 1. StandardsRegExt in the IVOA Architecture. The Registry enables applications in the User Layer to discover archives and services in the Resource Layer. The registry metadata model standards (in blue text and boxes) give structure to the information that enables that discovery. StandardsRegExt defines metadata for describing standards themselves (like those that define the Data Access Protocols).
In this architecture, users can leverage a variety of tools (from the User Layer) to discover archives and services of interest (represented in the Resource Layer); registries provide the means for this discovery. A registry is a repository of descriptions of resources that can be searched based on the metadata in those descriptions. In general, a resource can be more than just archives, data, or services; an IVOA standard, as represented by an IVOA document, can also be a resource. The Resource Metadata standard [RM] defines the core concepts used in the resource descriptions, and the VOResource standard [VOR] defines the XML format. StandardsRegExt is an extension of the VOResource standard that defines extra metadata for describing a standard.
2. The StandardsRegExt Data Model
The StandardsRegExt extension in general enables the description of three types of resources:
- a generic standard (specified by an external document)
- a standard specifically defining a service protocol
- a set of related, standardized names called keys.
<ri:Resource xsi:type="vstd:StandardKeyEnumeration" created="2001-12-31T12:00:00"
updated="2001-12-31T12:00:00" status="active">
<title>application languages</title>
<identifier>ivo://ivoa.net/std/application/languages</identifier>
<curation>
<publisher>IVOA</publisher>
<creator>
<name>IVOA</name>
<logo>http://www.ivoa.net/icons/ivoa_logo_small.jpg</logo>
</creator>
<date role="representative">2006-07-17</date>
<version>1.0</version>
<contact>
<name>IVOA Grid and Web Services WG</name>
<email>grid@ivoa.net</email>
</contact>
</curation>
<content>
<subject>IVOA Standard: registry</subject>
<description>
This resource defines keys for commonly used computer languages.
</description>
<referenceURL>http://www.ivoa.net/twiki/bin/view/IVOA/IvoaResReg</referenceURL>
</content>
<key>
<name>C</name>
<description>The C programming language</description>
</key>
<key>
<name>CPP</name>
<description>The C++ programming language</description>
</key>
<key>
<name>CSharp</name>
<description>The C# programming language</description>
</key>
<key>
<name>FORTRAN</name>
<description>The FORTRAN programming language</description>
</key>
<key>
<name>Java</name>
<description>The Java programming language</description>
</key>
<key>
<name>Perl</name>
<description>The Perl programming language</description>
</key>
<key>
<name>Python</name>
<description>The Python programming language</description>
</key>
</ri:Resource>
This description defines the meaning behind the following URI, namely the Python language:
ivo://ivoa.net/std/application/languages#Python
An application can thus refer to, for example, its support for the Python language via this URI. Should other languages become prevalent, the resource description could be updated to add the new names, or a new resource description could be created (with a new IVOA identifier).
2.1. The Schema Namespace and Location
The namespace associated with StandardsRegExt extensions is "http://www.ivoa.net/xml/StandardsRegExt/v1.0". Just like the namespace URI for the VOResource schema, the StandardsRegExt namespace URI can be interpreted as a URL. Resolving it will return the XML Schema document (given in Appendix A) that defines the StandardsRegExt schema.
Authors of VOResource instance documents may choose to
provide a location for the VOResource XML Schema document and its
extensions using the
xsi:schemaLocation attribute. While the choice of
the location value is the choice of the author, this specification
recommends using the StandardsRegExt namespace URI as its location URL
(as illustrated in the example above), as in,
xsi:schemaLocation="http://www.ivoa.net/xml/StandardsRegExt/v1.0
http://www.ivoa.net/xml/StandardsRegExt/v1.0"
- Note:
- The IVOA Registry Interface standard [RI] actually requires that the VOResource records it shares with other registries provide location URLs via
xsi:schemaLocationfor the VOResource schema and all legal extension schemas that are used in the records. This rule would apply to the StandardsRegExt schema.
The prefix, vstd, is used by convention as the
prefix defined for the StandardsRegExt schema; however, instance documents
may use any prefix of the author's choosing. In applications where
common use of prefixes is recommended (such as with the Registry
Interface specification [RI]), use of the
vstd prefix is recommended. Note also that in this
document, the vr prefix is used to label, as shorthand, a
type or element name that is defined in the VOResource schema, as in
vr:Resource.
As recommend by the VOResource standard [VR], the
StandardsRegExt schema sets elementFormDefault="unqualified".
This means that it is not necessary to qualify element names defined
in this schema with a namespace prefix (as there are no global
elements defined). The only place it is usually needed is as a
qualifier to a StandardsRegExt type name given as the value of an
xsi:type attribute.
2.2. Summary of Metadata Concepts
The StandardsRegExt extension defines three new types of resources. Two are specifically for independently documented standards:
vstd:Standard- This resource describes a general standard (e.g. data model, schema, protocol, etc.). The most important piece of metadata associated with this resource is the
<referenceURL>(from the core VOResource schema) which should point to the human-readable specification document that defines the standard. It also allows one to provide the recommended version of the standard to use.vstd:ServiceStandard- This resource type, which extends from
vstd:Standard, is specifically for describing a standard service protocol (e.g. Simple Cone Search). It differs fromvstd:Standardin that it also allows one to describe specific constraints on the service interface via its<interface>element.vstd:StandardKeyEnumeration- This resource type allows for the description of a related set of controlled names (referred to as keys) and their meanings. While keys can be defined as part of a
vstd:Standardorvstd:ServiceStandardresource, thevstd:StandardKeyEnumerationallows a set of key definitions to stand as a resource on its own, regardless of whether it is part of a documented standard or not.
- Note:
- As mentioned above, this standard allows controlled names to be defined either as part of a record of any of the above three types. When such names are being defined as part of an IVOA standard, it is recommended that the
vstd:Standardorvstd:ServiceStandardrecord corresponding to the IVOA standard document be used to define the names. Thevstd:StandardKeyEnumerationmight be convenient for definitions that are experimental or otherwise are for non-IVOA-based applications.
2.3. Defining Enumerations of Identifiers
A common practice when defining metadata is to restrict
certain string values to a controlled set of defined names, each with
a well-defined meaning. With XML
Schema, the controlled set can be enforced by a validating parser
(using the xsd:enumeration construct
[Schema]). One disadvantage of locking in the
vocabulary in an XML Schema document is that in order to grow the list
of allowed names, a revision of the XML Schema document is required,
which can be a disruptive change. To avoid this, it is the practice
within VOResource and its extensions to avoid "hard-coded"
enumerations in the XML Schema document for sets of defined values
that will likely change over time.
The StandardsRegExt schema provides an alternative to XML Schema-based definitions of controlled names. Instead, a controlled list of names, called standard keys, can be defined as part of any of the three StandardsRegExt resource types. Updating a resource description is much less disruptive than a Schema document, and as a resource is available via an IVOA-compliant registry, it is still possible for a (non-Schema-based) application to validate the use of the vocabulary.
The StandardsRegExt specification also defines a mapping from a key name to a URI. This allows these keys--and their underlying meaning--to be referenced in a globally unique way in a variety of contexts, not restricted to XML.
A key is defined using the vstd:StandardKey type which
consists simply of a name and a description. The key is mapped to a
URI by attaching the name as the "fragment"--i.e., appending after a
pound sign, #--to the IVOA identifier for the resource
description that defines the key:
ivoa-identifier#key-name
where ivoa-identifier is the resource's IVOA identifier and key-name is the name of a key defined in that resource. Consistent with the URI standard [URI], the key-name must not contain a pound (#) sign.
For example, we consider a resource description with an IVOA
identifier given by <identifier>
ivo://ivoa.net/std/QueryProtocol </identifier> that
defines a a key named case-insensitive; the URI
identifying this key would be:
ivo://ivoa.net/std/QueryProtocol#case-insensitive
This form of defining multiple keys, each with its own mapping to a URI, all in one resource has several advantages:
- The enumerations are naturally grouped under a single registry resource, and so can be retrieved with one registry query and need no further metadata to assert the association.
- The "Dublin core" metadata that is associated with a resource need only be entered once for the whole enumeration, rather than for each member of the enumeration - this saves both curation effort and space in the registry.
- If it is necessary to expand the list of controlled names (or shrink it), it is simple and fairly undisruptive to update the VOResource record.
- Note:
- When these enumerations are presented to a user in a GUI it is expected that only the "fragment" part that distinguishes the various members of the enumeration will be used as a choice value, as the full IVO ID is not usually particularly "user-friendly".
Some applications may wish to publish additional metadata associated
with a key definition through further extension of VOResource
metadata. This can be be done by deriving a new key metadatum type
derived by extension from the vstd:StandardKey.
3. The StandardsRegExt Metadata
3.1. Resource Type Extensions
This specification defined three new resource types. As is spelled
out in the VOResource specification, a resource description indicates
that it refers to one of these types of resources by setting the
xsi:type attribute to the namespace-qualified type name.
Doing so implies that the semantic meaning of that type applies to the
resource.
3.1.1. Standard
The vstd:Standard resource type describes any general
standard specification. This typically refers to an IVOA standard but
is not limited to such. Generally, the vstd:Standard
type is intended for standards other than standard
protocols (which should use the vstd:ServiceStandard type
instead). It extends the generic vr:Resource type as
follows.
<xs:complexType name="Standard" >
<xs:complexContent >
<xs:extension base="vr:Resource" >
<xs:sequence >
<xs:element name="endorsedVersion" type="vstd:EndorsedVersion"
maxOccurs="unbounded" />
<xs:element name="schema" type="vstd:Schema" minOccurs="0"
maxOccurs="unbounded" >
<xs:element name="deprecated" type="xs:token" minOccurs="0" />
<xs:element name="key" type="vstd:StandardKey" minOccurs="0"
maxOccurs="unbounded" />
</sequence>
</extension>
</complexContent>
</complexType>
As one of the purposes of this resource type is to enable users to
discover the documentation that defines the standard that the resource
describes, the <referenceURL> should point either
to the standard's specification document or to summary information about
the standard that can lead one to the specification document.
The vstd:Standard resource type adds two metadata terms
to the core set:
| vstd:Standard Extension Metadata Elements | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Element | Definition | ||||||||
| endorsedVersion |
| ||||||||
| schema |
| ||||||||
| deprecated |
| ||||||||
| key |
| ||||||||
The child <key> elements define terms with special
meaning to the standard; see section 3.2.
The purpose of the required <endorsedVersion>
element is to point potential users of the standard to the version
that is most preferred by the standard's publisher. If multiple
versions are relevant or in use, multiple elements may be given; in
this case, the use attribute can further help steer the
users to the preferred version.
<xs:complexType name="EndorsedVersion" >
<xs:simpleContent >
<xs:extension base="xs:string" >
<xs:attribute name="status" default="n/a" >
<xs:simpleType >
<xs:restriction base="xs:string" >
<xs:enumeration value="rec" />
<xs:enumeration value="pr" />
<xs:enumeration value="wd" />
<xs:enumeration value="iwd" />
<xs:enumeration value="note" />
<xs:enumeration value="n/a" />
</restriction>
</simpleType>
</attribute>
<xs:attribute name="use" >
<xs:simpleType >
<xs:restriction base="xs:string" >
<xs:enumeration value="preferred" />
<xs:enumeration value="deprecated" />
</restriction>
</simpleType>
</attribute>
</extension>
</simpleContent>
</complexType>
| vstd:EndorsedVersion Attributes | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Attribute | Definition | ||||||||||||||||||||||||
| status |
| ||||||||||||||||||||||||
| use |
| ||||||||||||||||||||||||
When all versions of the standard are considered deprecated by the
resource publisher, the <deprecated> child element
should appear. The explanation given as a value should mention the
standard that the current standard is deprecated by when relevant.
- Note:
- An example where the
<deprecated>element might be used in the VO is in the case of the SkyNode standard [SkyNode]. As of this writing, there are many instances of SkyNode services available in the VO, and where they are used, version 1.01 is endorsed; however, the IVOA has deprecated this standard in favor of the Table Access Protocol [TAP]. Thus, avstd:ServiceStandardsrecord for SkyNode should include a<deprecated>element whose content refers viewers to the TAP standard.
The <schema> element allows one to
list the locations of any schemas defined by the standard thereby making
them discoverable as well (just as the specification document is
discoverable via the <referenceURL>
element). It also can provide pointers to example uses of the
schemas. Typically (especially for IVOA standards), the schema is an
XML schema, and the location points to an XML Schema [Schema] document; however, this is not required.
Other schema types and definition formats are allowed.
<xs:complexType name="Schema">
<xs:sequence>
<xs:element name="location" type="xs:anyURI"
minOccurs="1" maxOccurs="1"/>
<xs:element name="description" type="xs:token"
minOccurs="0" maxOccurs="1" />
<xs:element name="example" type="xs:anyURI"
minOccurs="0" maxOccurs="unbounded" />
</xs:sequence>
<xs:attribute name="namespace" type="xs:token" use="required"/>
</xs:complexType>
As multiple schemas can be listed in the resource description, the
namespace attribute provides an
identifying label for each <schema>
element:
| vstd:Schema Attributes | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Attribute | Definition | ||||||||
| namespace |
| ||||||||
The main component of the <schema>
content is the URL pointing to the schema's definition document, but
it can also provide additional information useful for display:
| vstd:Schema Metadata Elements | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Element | Definition | ||||||||
| location |
| ||||||||
| description |
| ||||||||
| example |
| ||||||||
<?xml version="1.0" encoding="UTF-8"?>
<ri:Resource xsi:type="vstd:Standard" status="active"
created="2012-02-17T11:15:00" updated="2012-02-17T11:15:00"
xmlns:ri="http://www.ivoa.net/xml/RegistryInterface/v1.0"
xmlns:vstd="http://www.ivoa.net/xml/StandardsRegExt/v1.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<title> StandardsRegExt: a VOResource Schema Extension for Describing IVOA Standards </title>
<shortName> StandardsRegExt </shortName>
<identifier> ivo://ivoa.net/std/StandardsRegExt </identifier>
<curation>
<publisher ivo-id="ivo://ivoa.net/IVOA">
International Virtual Observatory Alliance
</publisher>
<creator>
<name> IVOA Registry Working Group </name>
<logo>http://www.ivoa.net/icons/ivoa_logo_small.jpg</logo>
</creator>
<date role="creation"> 2010-05-19 </date>
<date role="updated"> 2012-02-17 </date>
<version> 1.0 </version>
<contact>
<name> Resource Registry Working Group </name>
<email> registry@ivoa.net </email>
</contact>
</curation>
<content>
<subject> software standard </subject>
<subject> virtual observatory </subject>
<description>
This document describes an XML encoding standard for metadata about
IVOA standards themselves, referred to as StandardsRegExt. It is
intended to allow for the discovery of a standard via an IVOA
identifier that refers to the standard. It also allows one to define
concepts that are defined by the standard which can themselves be
referred to via an IVOA identifier (augmented with a URL fragment
identifier). Finally, it can also provide a machine interpretable
description of a standard service interface. We describe the general
model for the schema and explain its intended use by interoperable
registries for discovering resources.
</description>
<referenceURL>
http://www.ivoa.net/Documents/StandardsRegExt/
</referenceURL>
<type> Other </type>
<contentLevel> Research </contentLevel>
</content>
<endorsedVersion status="pr"> 1.0 </endorsedVersion>
<schema namespace="http://www.ivoa.net/xml/StandardsRegExt/v1.0">
<location>http://www.ivoa.net/xml/StandardsRegExt/v1.0</location>
<description>
the VOResource extension XML Schema for registering standards
</description>
<example>http://rofr.ivoa.net/examples/StandardsRegExt.xml</example>
<example>http://rofr.ivoa.net/examples/SIA.xml</example>
<example>http://rofr.ivoa.net/examples/VOSpace.xml</example>
</schema>
</ri:Resource>
3.1.2. ServiceStandard
The vstd:ServiceStandard resource type extends
vstd:Standard to describe more
specifically a standard protocol. It adds an
<interface> element to allow the interface defined
by the standard to be described in a machine-readable way. Its type
is defined to be vr:Interface, which is defined in the
VOResource schema [VR].
<xs:complexType name="ServiceStandard" >
<xs:complexContent >
<xs:extension base="vstd:Standard" >
<xs:sequence >
<xs:element name="interface" type="vr:Interface" minOccurs="0"
maxOccurs="unbounded" />
</sequence>
</extension>
</complexContent>
</complexType>
| vstd:ServiceStandard Extension Metadata Elements | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Element | Definition | ||||||||
| interface |
| ||||||||
Even though the vr:Interface type requires an
<accessURL> child element,
the <interface> element in a
vstd:ServiceStandard is intended to describe a service in
the abstract--i.e. without reference to a particular installation of the
service. Consequently, the accessURL should contain a bogus URL;
applications should not expect it to be resolvable.
An application can, in principle, get a complete machine-readable
description of a particular instance of a standard service (to, say,
create a GUI for that service on-the-fly) by combining the general
description in the vstd:ServiceStandard record with the
service resource description for the specific instance. The intended
process for building that description is as follows:
- The application obtains a VOResource resource record for the service instance (e.g. from a registry).
- The application extracts the
standardIDattribute for the desired service capability. - The
standardIDis resolved (via a registry) to avstd:ServiceStandardrecord for the service. This description would capture the required and optional (but standard) components of the service interface. - The specific instance's interface description is merged into
the standard one. The service's support of optional components
as well as its allowed customizations would override the
generic description from the
vstd:ServiceStandardrecord.
The so-called "simple" data access layer (DAL) services, such as the
Simple Image Access services [SIA], are
registered using the vs:ParamHTTP interface type
[VDS] to describe its interface. This interface
type allows one to list input parameters accepted by the service.
Each parameter can be marked as required, optional,
or ignored. Typically with DAL services, parameters defined
as optional by the standard may be legally ignored by an
implementation. Consequently, this specification recommends special
instruction for listing and interpreting input parameteters in a
vstd:ServiceStandard record when the interface is of type
vs:ParamHTTP: parameters that can be optionally provided
in a client's query but are ignorable by the implementation should be
marked as ignored. Applications that consume such
vstd:ServiceStandard records should thus interpret the
parameters marked ignored as optional for use by
clients and ignorable by implementations. This minimizes the
list of parameters that the service provider must list in the
registration of a particular service instance to the ones that are
actually supported (i.e. not ignored): when the list service
instance description is merged into the list from the
vstd:ServiceStandard record (step 4 above), the result is
an accurate list of the optional but supported and the ignored
parameters for that service instance.
An example of an instance of a vstd:ServiceStandard
record is shown in Appendix B. It describes the
Simple Image Access Specification [SIA] and
in particular illustrates the recommended way to list input parameters
defined by the standard.
3.1.3. StandardKeyEnumeration
The vstd:StandardKeyEnumeration resource type is available
for collecting definitions of related, standard keys. Each key defined
within this resource can then be referred to by a unique IVOA
Identifier URI (see section 3.2). To support
this, the vstd:StandardKeyEnumeration resource simply
adds the <key> element to the standard core
metadata.
<xs:complexType name="StandardKeyEnumeration" >
<xs:complexContent >
<xs:extension base="vr:Resource" >
<xs:sequence >
<xs:element name="key" type="vstd:StandardKey" maxOccurs="unbounded"
minOccurs="1" />
</sequence>
</extension>
</complexContent>
</complexType>
| vstd:StandardKeyEnumeration Extension Metadata Elements | |||||||
|---|---|---|---|---|---|---|---|
| Element | Definition | ||||||
| key |
| ||||||
The contents of the <key> element is described in
the next section.
3.2. Defining Keys: StandardKey and StandardKeyURI
The vstd:StandardKey type provides the means to
define keys (as defined in section 2.3) within
a VOResource record.
<xs:complexType name="StandardKey" >
<xs:sequence >
<xs:element name="name" type="vstd:fragment" />
<xs:element name="description" type="xs:token" />
</sequence>
</complexType>
<xs:simpleType name="fragment" >
<xs:restriction base="xs:string" >
<xs:pattern value="([A-Za-z0-9;/\?:@&=\+$,\-_.!~\*'\(\)]|%[A-Fa-f0-9]{2})+" />
</restriction>
</simpleType>
| vstd:StandardKey Metadata Elements | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Element | Definition | ||||||||
| name |
| ||||||||
| description |
| ||||||||
Defining a key via a <key> element within a
VOResource record implies the definition of a unique URI formed
according to the syntax described in section
2.3 that represents the semantics given by the value of the
<description> child element. Because the URI must
be globally unique, the key name (given by the
<name> child element) must be unique within the
VOResource record.
Though it is not needed by StandardsRegExt resource records, the StandardsRegExt
schema further defines a convenience type,
vstd:StandardKeyURI, which defines the legal pattern for
a full standard key identifier (as defined in
section 2.3). Applications that wish to use
XML Schema to validate the form of a key URI may import the StandardsRegExt
schema and use this type.
- Note:
- It is worth noting that just using or otherwise referencing a standard key URI in an application does not require importing the StandardsRegExt nor need there be any reference to the StandardsRegExt namespace. The role of the StandardsRegExt schema is simply to provide a way of documenting the definitions in a VOResource record. Thus, an application may dereference the URI for display or user help purposes; however, dereferencing is not necessary to use the URI.
Appendix A: The complete StandardsRegExt Schema
The schema is included here for completeness - the definitive source of the schema is at http://www.ivoa.net/xml/StandardsRegExt/v1.0.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema targetNamespace="http://www.ivoa.net/xml/StandardsRegExt/v1.0"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:vr="http://www.ivoa.net/xml/VOResource/v1.0"
xmlns:vstd="http://www.ivoa.net/xml/StandardsRegExt/v1.0"
xmlns:vm="http://www.ivoa.net/xml/VOMetadata/v0.1"
elementFormDefault="unqualified" attributeFormDefault="unqualified"
version="1.0" >
<xs:annotation>
<xs:appinfo>
<vm:schemaName>StandardsRegExt</vm:schemaName>
<vm:schemaPrefix>xs</vm:schemaPrefix>
<vm:targetPrefix>vstd</vm:targetPrefix>
</xs:appinfo>
<xs:documentation>
This is a core schema for describing IVOA Standards themselves
</xs:documentation>
</xs:annotation>
<xs:import namespace="http://www.ivoa.net/xml/VOResource/v1.0"
schemaLocation="http://www.ivoa.net/xml/VOResource/v1.0"/>
<xs:complexType name="Standard">
<xs:annotation>
<xs:documentation>
a description of a standard specification.
</xs:documentation>
<xs:documentation>
This typically refers to an IVOA standard but is not
limited to such.
</xs:documentation>
</xs:annotation>
<xs:complexContent>
<xs:extension base="vr:Resource">
<xs:sequence>
<xs:element name="endorsedVersion" type="vstd:EndorsedVersion"
maxOccurs="unbounded">
<xs:annotation>
<xs:documentation>
the version of the standard that is recommended for use.
</xs:documentation>
<xs:documentation>
More than one version can be listed, indicating
that any of these versions are recognized as
acceptable for use.
</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="schema" type="vstd:Schema"
minOccurs="0" maxOccurs="unbounded">
<xs:annotation>
<xs:documentation>
a description and pointer to a schema document
defined by this standard.
</xs:documentation>
<xs:documentation>
This is most typically an XML Schema, but it need
not be strictly.
</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="deprecated" type="xs:token" minOccurs="0">
<xs:annotation>
<xs:documentation>
when present, this element indicates that all
versions of the standard are considered
deprecated by the publisher. The value is a
human-readable explanation for the designation.
</xs:documentation>
<xs:documentation>
The explanation should indicate if another
standard should be preferred.
</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="key" type="vstd:StandardKey"
minOccurs="0" maxOccurs="unbounded">
<xs:annotation>
<xs:documentation>
a defined key associated with this standard.
</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:complexType name="EndorsedVersion">
<xs:simpleContent>
<xs:extension base="xs:string">
<xs:attribute name="status" default="n/a">
<xs:annotation>
<xs:documentation>
the IVOA status level of this version of the standard.
</xs:documentation>
<xs:documentation>
For values of "rec", "pr", "wd", and "note", the
record's referenceURL element should point to the
official specification document in the IVOA Document
Repository; if the document does not appear there,
these values should not be used.
</xs:documentation>
</xs:annotation>
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:enumeration value="rec">
<xs:annotation>
<xs:documentation>
an IVOA Recommendation
</xs:documentation>
</xs:annotation>
</xs:enumeration>
<xs:enumeration value="pr">
<xs:annotation>
<xs:documentation>
an IVOA Proposed Recommendation
</xs:documentation>
</xs:annotation>
</xs:enumeration>
<xs:enumeration value="wd">
<xs:annotation>
<xs:documentation>
an IVOA Working Draft
</xs:documentation>
</xs:annotation>
</xs:enumeration>
<xs:enumeration value="iwd">
<xs:annotation>
<xs:documentation>
an internal Working Draft of an IVOA Working Group
</xs:documentation>
</xs:annotation>
</xs:enumeration>
<xs:enumeration value="note">
<xs:annotation>
<xs:documentation>
a published IVOA Note
</xs:documentation>
</xs:annotation>
</xs:enumeration>
<xs:enumeration value="n/a">
<xs:annotation>
<xs:documentation>
not an IVOA standard or protostandard at
this time.
</xs:documentation>
</xs:annotation>
</xs:enumeration>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
<xs:attribute name="use">
<xs:annotation>
<xs:documentation>
A designation of preference for the version compared
to other versions in use.
</xs:documentation>
</xs:annotation>
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:enumeration value="preferred">
<xs:annotation>
<xs:documentation>
the most preferred version.
</xs:documentation>
<xs:documentation>
Only one version should have this designation.
</xs:documentation>
</xs:annotation>
</xs:enumeration>
<xs:enumeration value="deprecated">
<xs:annotation>
<xs:documentation>
a version whose use is now discouraged
because a newer version is preferred.
</xs:documentation>
</xs:annotation>
</xs:enumeration>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
<xs:complexType name="Schema">
<xs:annotation>
<xs:documentation>
a description of a schema definition
</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="location" type="xs:anyURI"
minOccurs="1" maxOccurs="1">
<xs:annotation>
<xs:documentation>
A URL pointing to a document that formally defines
the schema.
</xs:documentation>
<xs:documentation>
The document should be in a machine-parsable format
when applicable. For example, when refering to an
XML schema, the document should be an XML Schema or
similar document that can be used to validate an
instance document.
</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="description" type="xs:token"
minOccurs="0" maxOccurs="1" >
<xs:annotation>
<xs:documentation>
A human-readable description of what the schema
defines or is used for.
</xs:documentation>
<xs:documentation>
A brief description--e.g. one statement--is
recommended for display purposes.
</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="example" type="xs:anyURI"
minOccurs="0" maxOccurs="unbounded">
<xs:annotation>
<xs:documentation>
A URL pointing to a sample document that illustrates
the use of the schema.
</xs:documentation>
<xs:documentation>
When applicable (e.g. XML), the document should be
in the format defined by the schema document.
</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
<xs:attribute name="namespace" type="xs:token" use="required">
<xs:annotation>
<xs:documentation>
an identifier for the schema being described. Each instance
of this attribute must be unique within the resourse description.
</xs:documentation>
<xs:documentation>
For XML schemas, this should be the schema's namespace URI.
Otherwise, it should be a unique label to distinguish it from
other schemas described in the same resource description.
</xs:documentation>
</xs:annotation>
</xs:attribute>
</xs:complexType>
<xs:complexType name="ServiceStandard">
<xs:annotation>
<xs:documentation>
a description of a standard service protocol.
</xs:documentation>
<xs:documentation>
This typically refers to an IVOA standard but is not
limited to such.
</xs:documentation>
</xs:annotation>
<xs:complexContent>
<xs:extension base="vstd:Standard">
<xs:sequence>
<xs:element name="interface" type="vr:Interface"
minOccurs="0" maxOccurs="unbounded">
<xs:annotation>
<xs:documentation>
an abstract description of one of the interfaces defined
by this service standard.
</xs:documentation>
<xs:documentation>
This element can provide details about the interface
that apply to all implementations. Each interface
element should specify a role with a value starting
with "std:" or, if there is only one standard interface,
is equal to "std".
</xs:documentation>
<xs:documentation>
Applications that, for example, wish to build a GUI
to the service on-the-fly would first access this generic
description. Site-specific variations, such
as supported optional arguments or site specific
arguments, would be given in the actual implemented
service description and overrides any common information
found in this generic description. This generic interface
description can be matched with the site-specific one
using the role attribute.
</xs:documentation>
<xs:documentation>
Even though the Interface type requires an
accessURL child element, this element is
intended to describe a service in the
abstract--i.e. without reference to a particular
installation of the service. Consequently,
the accessURL may contain a bogus URL;
applications should not expect it to be resolvable.
</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:complexType name="StandardKeyEnumeration">
<xs:annotation>
<xs:documentation>
A registered set of related keys. Each key can be
uniquely identified by combining the IVOA identifier of
this resource with the key name separated by the URI
fragment delimiter, #, as in: ivoa-identifier#key-name
</xs:documentation>
</xs:annotation>
<xs:complexContent>
<xs:extension base="vr:Resource">
<xs:sequence>
<xs:element name="key" type="vstd:StandardKey"
maxOccurs="unbounded" minOccurs="1">
<xs:annotation>
<xs:documentation>
the name and definition of a key--a named concept,
feature, or property.
</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:complexType name="StandardKey">
<xs:annotation>
<xs:documentation>
The name and definition of a key--a named concept,
feature, or property.
</xs:documentation>
<xs:documentation>
This key can be identified via an IVOA identifier
of the form ivo://authority/resource#name where name is
the value of the child name element.
</xs:documentation>
<xs:documentation>
This type can be extended if the key has
other metadata associated with it.
</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="name" type="vstd:fragment">
<xs:annotation>
<xs:documentation>
The property identifier which would appear as the
fragment (string after the pound sign, #) in an IVOA
identifier.
</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="description" type="xs:token">
<xs:annotation>
<xs:documentation>
A human-readable definition of this property.
</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
</xs:complexType>
<xs:simpleType name="StandardKeyURI">
<xs:annotation>
<xs:documentation>
reference that forces an IVOA ID with a # fragment part
appended to match the standard pattern for registering
enumeration values with a vstd:StandardKeyList
</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:anyURI">
<xs:pattern value="ivo://[\w\d][\w\d\-_\.!~\*'\(\)\+=]{2,}(/[\w\d\-_\.!~\*'\(\)\+=]+(/[\w\d\-_\.!~\*'\(\)\+=]+)*)?(#([A-Za-z0-9;/\?:@&=\+$,\-_\.!~\*'\(\)]|%[A-Fa-f0-9]{2})+)?"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="fragment">
<xs:annotation>
<xs:documentation>
the allowed characters for a fragment identifier taken
from rfc2396
</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:string">
<xs:pattern
value="([A-Za-z0-9;/\?:@&=\+$,\-_\.!~\*'\(\)]|%[A-Fa-f0-9]{2})+"/>
</xs:restriction>
</xs:simpleType>
</xs:schema>
Appendix B: A Sample Record
This example shows how one can describe an IVOA standard, the Simple Image Access Protocol. It includes a description of the input parameters defined in the specification.
><?xml version="1.0" encoding="UTF-8"?>
<resource xsi:type="vstd:ServiceStandard" status="active"
created="2000-01-01T09:00:00" updated="2000-01-01T09:00:00"
xmlns:vstd="http://www.ivoa.net/xml/StandardsRegExt/v1.0"
xmlns:vs="http://www.ivoa.net/xml/VODataService/v1.1"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.ivoa.net/xml/VOResource/v1.0
VOResource-v1.0.xsd
http://www.ivoa.net/xml/VODataService/v1.1
VODataService-v1.1.xsd
http://www.ivoa.net/xml/StandardsRegExt/v1.0
StandardsRegExt-v1.0.xsd">
<title> Simple Image Access Protocol </title>
<shortName> SIA </shortName>
<identifier> ivo://ivoa.net/std/SIA </identifier>
<curation>
<publisher ivo-id="ivo://ivoa.net/IVOA">
International Virtual Observatory Alliance
</publisher>
<creator>
<name> Doug Tody </name>
</creator>
<creator>
<name> Ray Plante </name>
</creator>
<date> 2004-05-24 </date>
<contact>
<name> Data Access Layer Working Group </name>
<email> dal@ivoa.net </email>
</contact>
</curation>
<content>
<subject> software standard </subject>
<subject> virtual observatory </subject>
<description>
The Simple Image Access Protocol is a protocol for retrieving
image data from a variety of astronomical image repositories
through a uniform interface. The interface is meant to be
reasonably simple to implement by service providers. A query
defining a rectangular region on the sky is used to query for
candidate images. The service returns a list of candidate
images formatted as a VOTable. For each candidate image an
access reference URL may be used to retrieve the image. Images
may be returned in a variety of formats including FITS and
various graphics formats. Referenced images are often computed
on the fly, e.g., as cutouts from larger images.
</description>
<referenceURL>
http://www.ivoa.net/Documents/latest/SIA.html
</referenceURL>
<type> Other </type>
<contentLevel> Research </contentLevel>
</content>
<endorsedVersion status="rec"> 1.0 </endorsedVersion>
<interface xsi:type="vs:ParamHTTP" role="std" version="1.0">
<accessURL use="base"> http://sample.org/cgi-bin/sia </accessURL>
<queryType>GET</queryType>
<resultType>text/xml+votable</resultType>
<!--
- These are the standard input parameters defined in the
- SIA spec
-->
<param use="required">
<name>POS</name>
<description>
Search Position in the form "ra,dec" where ra and dec are given
in decimal degrees in the ICRS coordinate system.
</description>
<unit>degrees</unit>
<dataType arraysize="2">real</dataType>
</param>
<param use="required">
<name>SIZE</name>
<description>
Size of search region in the RA and Dec. directions in decimal
degrees.
</description>
<unit>degrees</unit>
<dataType arraysize="2">real</dataType>
</param>
<param use="optional">
<name>FORMAT</name>
<description>Requested format of images.</description>
<dataType>string</dataType>
</param>
<param use="optional">
<name>INTERSECT</name>
<description>
Choice of intersection of matched images with the region of
interest.
</description>
<dataType>string</dataType>
</param>
<param use="ignored">
<name>NAXIS</name>
<description>
The number of pixels desired along each axis
</description>
<dataType arraysize="2">integer</dataType>
</param>
<param use="ignored">
<name>CFRAME</name>
<description>
the coordinate frame to impose on the image.
</description>
<dataType>string</dataType>
</param>
<param use="ignored">
<name>EQUINOX</name>
<description>
the epoch of the mean equator and equinox for the specified
coordinate system reference frame (CFRAME). coordinate frame to
impose on the image.
</description>
<dataType>string</dataType>
</param>
<param use="ignored">
<name>CRPIX</name>
<description>
the pixel position to locate the reference position in the output
image.
</description>
<dataType arraysize="2">real</dataType>
</param>
<param use="ignored">
<name>CRVAL</name>
<description>
the world coordinates of the reference position in the output
image in decimal degrees
</description>
<dataType arraysize="2">real</dataType>
</param>
<param use="ignored">
<name>CDELT</name>
<description>
the scale of the output image in decimal degrees per pixel
</description>
<dataType arraysize="2">real</dataType>
</param>
<param use="ignored">
<name>ROTANG</name>
<description>
the rotation angle to put into the output image's coordinate system
</description>
<dataType arraysize="2">real</dataType>
</param>
<param use="ignored">
<name>PROJ</name>
<description>
the projection to impose in the construction of the output image
</description>
<dataType>string</dataType>
</param>
<param use="ignored">
<name>VERB</name>
<description>
the level of verbosity in the output.
</description>
<dataType>string</dataType>
</param>
</interface>
</resource>
Appendix C: Change History
Changes since PR-v1.0 20120213:
- added the
<schema>element tovstd:Standard - updated example in section 3.1.1
Changes since PR-v1.0 20111017:
- added Note box to section 2.2 that recommends against using
vstd:StandardKeyEnumerationto describe keys when they are defined by an IVOA standard. - added statement in section 2.3 highlighting that # signs are not allowed in key names.
- added
iwdandnoteas allowed values forvstd:EndorsedVersion'sstatusattribute. - converted a Note box in section 3.1.2 to a normative paragraph
that recommends listing optional
ParamHTTPparameters as ignored. Note that there is a related error in the VODataService standard [VDS]: while theignoredvalue is defined in the schema, it is not included in the document text. - added sample
vstd:ServiceStandardinstance record back in as Appendix B - added references to TAP and SIA
- fixed various grammatical typos.
Changes since PR-v1.0 20110921:
- In
<endorsedVersion>, changed "prop" to "pr". - various typo corrections
Changes since PR-v1.0 20110316:
- Corrected ampersand representation in schema listing
- Various typo corrections and clarifications
Changes since WD-v1.0 20100519:
- Prepped for PR
- improved discussion of example in section 2
- Added standard architecture sub-section
- updated in-lined schema (App. 1)
Changes since WD-v1.0 20100514:
- short name changed from VOStandard to StandardsRegExt
Changes since WD-v0.4:
- removed App. B. (Sample instance) as examples appear throughout the document.
References
- [RI]
- Benson, Kevin, Plante, Ray, Auden, Elizabeth, Graham, Matthew, Greene,
Gretchen, Hill, Martin, Linde, Tony, Morris, Dave, O'Mullane,
Wil, Rixon, Guy, Andrews, Kona 2008,
IVOA Registry Interfaces, v1.0, IVOA
Recommendation,
http://www.ivoa.net/Documents/RegistryInterface/20091104/ - [URI]
- Berners-Lee, Tim, Fielding, R., Irvine, U.C., Masinter, L. 1998.
Universal
Resource Identifier (URI): Generic Syntax, IETF RFC 2396,
http://www.ietf.org/rfc/rfc2396.txt - [RFC 2119]
- Bradner, S. 1997.
Key words for use in RFCs to Indicate Requirement
Levels, IETF RFC 2119,
http://www.ietf.org/rfc/rfc2119.txt - [XML]
- Bray, Tim, Paoli, Jean, Sperberg-McQueen, C. M., Maler, Eve,
Yergeau, Francois (editors) 2004,
Extensible Markup
Language (XML) 1.0 (Third Edition), W3C
Recommendation 04 February 2004,
http://www.w3.org/TR/REC-xml - [Schema]
- Fallside, David C., Walmsley, Priscilla (editors) 2004,
XML Schema
Part 0: Primer Second Edition, W3C Recommendation 28
October 2004,
http://www.w3.org/TR/xmlschema-0/ - [Arch]
- Arviset, Christophe, Severin Gaudet, and the IVOA Technical
Coordination Group 2010,
The IVOA Architecture, v1.0, IVOA Note, 23 November 2010,
http://www.ivoa.net/Documents/Notes/IVOAArchitecture/ - [RM]
- Hanisch, Robert (ed.) 2004. Resource Metadata for the Virtual Observatory, Version 1.01, IVOA Recommendation,
http://www.ivoa.net/Documents/REC/ResMetadata/RM-20040426.htm - [RofR]
- Plante, R. 2007,
The Registry of Registries v1.00, IVOA Note,
http://www.ivoa.net/Documents/Notes/RegistryOfRegistries/RegistryOfRegistries-20070628.html - [VR]
- Plante, R., Benson, K., Graham, M., Greene,
G., Harrison, P., Lemson, G., Linde, T., Rixon,
G., Stébé, A. 2008,
VOResource: an XML Encoding Schema for Resource Metadata,
v1.03, IVOA Recommendation,
http://www.ivoa.net/Documents/REC/ReR/VOResource-20080222.html - [ID]
- Plante, R., Linde, T., Williams, R., Noddle, K. 2005,
IVOA Identifiers v1.12,
http://www.ivoa.net/Documents/REC/Identifiers/Identifiers-20070302.html. - [SIA]
- Tody, Doug, Plante, Ray, and Harrison, Paul 2009,
Simple Image Access Specification Version 1.0, IVOA
Recommendation,
http://www.ivoa.net/Documents/SIA/20091116/. - [TAP]
- Dowler, Patric, Rixon, Guy, and Tody, Doug 2010,
Table Access Protocol, Version 1.0, IVOA
Recommendation,
http://www.ivoa.net/Documents/TAP/20100327/. - [VDS]
- Plante, R., Stébé, A. Benson, K., Dowler, P. Graham, M.,
Greene, G., Harrison, P., Lemson, G., Linde, T., Rixon,
G., Stébé, A. 2010,
VODataService: a VOResource Schema Extension for Describing
Collections and Services,
v1.1, IVOA Recommendation,
http://www.ivoa.net/Documents/VODataService/20101202/
$Revision: 1.2 $ $Date: 2012/02/17 15:38:30 $ $HeadURL: https://volute.googlecode.com/svn/trunk/projects/registry/StandardsRegExt/StandardsRegExt-v1.0pr.html $