Difference: DALIV12RFC (1 vs. 8)

Revision 82026-01-28 - MarkKettenis

 
META TOPICPARENT name="WebPreferences"

DALI 1.2 Proposed Recommendation: Request for Comments

The changes in DALI-1.2 are primarily the inclusion of additional xtypes that can be used to add extra type information to columns (e.g. in VOTable, tap\_schema) and how such values are serialised. Also in this update: VOSI-availability is now optional as it is considered deprecated and is being removed from VOSI-next and OpenAPI components for some key DALI parameters are included in the specification. As always, various ambiguous statements have been clarified where needed.

Latest version of DALI-1.2 can be found at:

Reference Interoperable Implementations

The prototype CAOM-2.5 TAP service at CADC (https://ws.cadc-ccda.hia-iha.nrc-cnrc.gc.ca/caom25/argus) makes use of the following xtypes (some from previous standards):

xtype num_columns standard
multishape 1 PR-DALI-1.2
timestamp 21  
adql:REGION 1 see note
clob 1 see note
multiinterval 3 PR-DALI-1.2
point 1  
uri 28 PR-DALI-1.2
shape 2 PR-DALI-1.2
uuid 14 PR-DALI-1.2
interval 10  
query: select xtype, count(*) as num_columns from tap_schema.columns where xtype is not null group by xtype.
note: the adql:REGION value is still used for ivoa.ObsCore.s_region; the clob value is used for ivoa.ObsCore.access_url

The production CADC TAP service (CAOM-2.4) make use of some previously proposed/discussed xtype values and will be updated to DALI-1.2 in the near future.

Implementation Validators

TOPCAT/STILTS: Validator and implementation updates to cover all DALI 1.2 xtypes as appropriate, available in unreleased version at http://www.star.bristol.ac.uk/mbt/releases/topcat/pre/topcat-full_dali12.jar:

  • Validation:
    • taplint new stage TYP checks that column metadata is consistent with xtype declarations (e.g. xtype="interval" columns have arraysize="2").
    • votlint/taplint checks VOTable column content is consistent with xtype declarations (e.g. xtype="uuid" values match xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
  • Implementation:
    • Topcat shape plotting upgraded to recognise new DALI xtypes range, shape, multishape, moc.

Comments from the IVOA Community during RFC/TCG review period: 2025-11-05 - 2025-12-17

The comments from the TCG members during the RFC/TCG review should be included in the next section.

In order to add a comment to the document, please edit this page and add your comment to the list below in the format used for the example (include your Wiki Name so that authors can contact you for further information). When the author(s) of the document have considered the comment, they will provide a response after the comment.

Additional discussion about any of the comments or responses can be conducted on the WG mailing list. However, please be sure to enter your initial comments here for full consideration in any future revisions of this document

Comments from TCG member during the RFC/TCG Review Period: 2025-11-05 - 2025-12-17

WG chairs or vice chairs must read the Document, provide comments if any (including on topics not directly linked to the Group matters) or indicate that they have no comment.

IG chairs or vice chairs are also encouraged to do the same, althought their inputs are not compulsory.

TCG Chair & Vice Chair

Applications Working Group

Section 2 - End Points: "A VOSI-capabilities endpoint is required for services registered in the IVOA registry system; the VOSI-capabilities endpoint is optional for services that are not registered or only included as auxiliary capabilities (e.g. of a data collection resource)." - Why does it have to be optional? Services either use the VO Architecture to which VOSI, which requires `capabilities` end point, is central or they don't but they are not VO Services. The `\capabilities` endpoint seems to be fundamental to interoperability in VO.

xtypes:

moc - should this be moc-2.0 or similar to allow for future versions of moc to be added later as the document states

shape - is this required? Can shape and multishape be merged into one xtype, i.e, shape but with the properties of multishape?

multishape - this is more an observation: this only supports union operations, so more complex shapes such as polygons with holes for example, would need to be redifned and expressed as union of polygons.


Why only 3 parameters have OpenAPI specs?

Data Access Layer Working Group

Data Model Working Group

Distributed Services & Protocols Working Group

Registry Working Group

Semantics Working Group

Data Curation & Preservation Interest Group

Education Interest Group

High Energy Interest Group

Knowledge Discovery Interest Group

Operations Interest Group

Radio Astronomy Interest Group

Added:
>
>		Spotted a few remaining typos:

In section 2.3, first sentenced "is always accessed as a using the name". Should that be "is always accesed using the name"?

In section 2.4: "If the VOSI-availability endpoint implemented a description of this capability must be provided" should that be "If the VOSI-availability endpoint is implemented a description of this capability must be provided"?

Otherwise I see no issues from a Radio IG perspective.

 

Solar System Interest Group

Time Domain Interest Group

Standards and Processes Committee

TCG Vote : 2025-12-18 - 2026-01-08

If you have minor comments (typos) on the last version of the document please indicate it in the Comments column of the table and post them in the TCG comments section above with the date.

Group Yes No Abstain Comments
TCG        
Apps        
DAL        
DM        
DSP        
Registry        
Semantics        
DCP        
Edu        
KDIG        
Ops        
Changed:
<
<
Radio        
>
>
Radio Yes      
 
SSIG        
TD        
StdProc         


<--  
-->
Added:
>
>

Revision 72026-01-26 - AdrianDamian

 
META TOPICPARENT name="WebPreferences"

DALI 1.2 Proposed Recommendation: Request for Comments

The changes in DALI-1.2 are primarily the inclusion of additional xtypes that can be used to add extra type information to columns (e.g. in VOTable, tap\_schema) and how such values are serialised. Also in this update: VOSI-availability is now optional as it is considered deprecated and is being removed from VOSI-next and OpenAPI components for some key DALI parameters are included in the specification. As always, various ambiguous statements have been clarified where needed.

Latest version of DALI-1.2 can be found at:

Reference Interoperable Implementations

The prototype CAOM-2.5 TAP service at CADC (https://ws.cadc-ccda.hia-iha.nrc-cnrc.gc.ca/caom25/argus) makes use of the following xtypes (some from previous standards):

xtype num_columns standard
multishape 1 PR-DALI-1.2
timestamp 21  
adql:REGION 1 see note
clob 1 see note
multiinterval 3 PR-DALI-1.2
point 1  
uri 28 PR-DALI-1.2
shape 2 PR-DALI-1.2
uuid 14 PR-DALI-1.2
interval 10  
query: select xtype, count(*) as num_columns from tap_schema.columns where xtype is not null group by xtype.
note: the adql:REGION value is still used for ivoa.ObsCore.s_region; the clob value is used for ivoa.ObsCore.access_url

The production CADC TAP service (CAOM-2.4) make use of some previously proposed/discussed xtype values and will be updated to DALI-1.2 in the near future.

Implementation Validators

TOPCAT/STILTS: Validator and implementation updates to cover all DALI 1.2 xtypes as appropriate, available in unreleased version at http://www.star.bristol.ac.uk/mbt/releases/topcat/pre/topcat-full_dali12.jar:

  • Validation:
    • taplint new stage TYP checks that column metadata is consistent with xtype declarations (e.g. xtype="interval" columns have arraysize="2").
    • votlint/taplint checks VOTable column content is consistent with xtype declarations (e.g. xtype="uuid" values match xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
  • Implementation:
    • Topcat shape plotting upgraded to recognise new DALI xtypes range, shape, multishape, moc.

Comments from the IVOA Community during RFC/TCG review period: 2025-11-05 - 2025-12-17

The comments from the TCG members during the RFC/TCG review should be included in the next section.

In order to add a comment to the document, please edit this page and add your comment to the list below in the format used for the example (include your Wiki Name so that authors can contact you for further information). When the author(s) of the document have considered the comment, they will provide a response after the comment.

Additional discussion about any of the comments or responses can be conducted on the WG mailing list. However, please be sure to enter your initial comments here for full consideration in any future revisions of this document

Comments from TCG member during the RFC/TCG Review Period: 2025-11-05 - 2025-12-17

WG chairs or vice chairs must read the Document, provide comments if any (including on topics not directly linked to the Group matters) or indicate that they have no comment.

IG chairs or vice chairs are also encouraged to do the same, althought their inputs are not compulsory.

TCG Chair & Vice Chair

Applications Working Group

Added:
>
>		 Section 2 - End Points: "A VOSI-capabilities endpoint is required for services registered in the IVOA registry system; the VOSI-capabilities endpoint is optional for services that are not registered or only included as auxiliary capabilities (e.g. of a data collection resource)." - Why does it have to be optional? Services either use the VO Architecture to which VOSI, which requires `capabilities` end point, is central or they don't but they are not VO Services. The `\capabilities` endpoint seems to be fundamental to interoperability in VO.

xtypes:

moc - should this be moc-2.0 or similar to allow for future versions of moc to be added later as the document states

shape - is this required? Can shape and multishape be merged into one xtype, i.e, shape but with the properties of multishape?

multishape - this is more an observation: this only supports union operations, so more complex shapes such as polygons with holes for example, would need to be redifned and expressed as union of polygons.


Why only 3 parameters have OpenAPI specs?

 

Data Access Layer Working Group

Data Model Working Group

Distributed Services & Protocols Working Group

Registry Working Group

Semantics Working Group

Data Curation & Preservation Interest Group

Education Interest Group

High Energy Interest Group

Knowledge Discovery Interest Group

Operations Interest Group

Radio Astronomy Interest Group

Solar System Interest Group

Time Domain Interest Group

Standards and Processes Committee

TCG Vote : 2025-12-18 - 2026-01-08

If you have minor comments (typos) on the last version of the document please indicate it in the Comments column of the table and post them in the TCG comments section above with the date.

Group Yes No Abstain Comments
TCG        
Apps        
DAL        
DM        
DSP        
Registry        
Semantics        
DCP        
Edu        
KDIG        
Ops        
Radio        
SSIG        
TD        
StdProc         


<--  
-->

Revision 62025-11-13 - PatrickDowler

 
META TOPICPARENT name="WebPreferences"

DALI 1.2 Proposed Recommendation: Request for Comments

The changes in DALI-1.2 are primarily the inclusion of additional xtypes that can be used to add extra type information to columns (e.g. in VOTable, tap\_schema) and how such values are serialised. Also in this update: VOSI-availability is now optional as it is considered deprecated and is being removed from VOSI-next and OpenAPI components for some key DALI parameters are included in the specification. As always, various ambiguous statements have been clarified where needed.

Latest version of DALI-1.2 can be found at:

Reference Interoperable Implementations

The prototype CAOM-2.5 TAP service at CADC (https://ws.cadc-ccda.hia-iha.nrc-cnrc.gc.ca/caom25/argus) makes use of the following xtypes (some from previous standards):

Deleted:
<
<		 NOTE: this prototype service is currently offline but should be available again soon.
 
xtype num_columns standard
multishape 1 PR-DALI-1.2
timestamp 21  
adql:REGION 1 see note
clob 1 see note
multiinterval 3 PR-DALI-1.2
point 1  
uri 28 PR-DALI-1.2
shape 2 PR-DALI-1.2
uuid 14 PR-DALI-1.2
interval 10  
query: select xtype, count(*) as num_columns from tap_schema.columns where xtype is not null group by xtype.
note: the adql:REGION value is still used for ivoa.ObsCore.s_region; the clob value is used for ivoa.ObsCore.access_url

The production CADC TAP service (CAOM-2.4) make use of some previously proposed/discussed xtype values and will be updated to DALI-1.2 in the near future.

Implementation Validators

TOPCAT/STILTS: Validator and implementation updates to cover all DALI 1.2 xtypes as appropriate, available in unreleased version at http://www.star.bristol.ac.uk/mbt/releases/topcat/pre/topcat-full_dali12.jar:

  • Validation:
    • taplint new stage TYP checks that column metadata is consistent with xtype declarations (e.g. xtype="interval" columns have arraysize="2").
    • votlint/taplint checks VOTable column content is consistent with xtype declarations (e.g. xtype="uuid" values match xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
  • Implementation:
    • Topcat shape plotting upgraded to recognise new DALI xtypes range, shape, multishape, moc.

Comments from the IVOA Community during RFC/TCG review period: 2025-11-05 - 2025-12-17

The comments from the TCG members during the RFC/TCG review should be included in the next section.

In order to add a comment to the document, please edit this page and add your comment to the list below in the format used for the example (include your Wiki Name so that authors can contact you for further information). When the author(s) of the document have considered the comment, they will provide a response after the comment.

Additional discussion about any of the comments or responses can be conducted on the WG mailing list. However, please be sure to enter your initial comments here for full consideration in any future revisions of this document

Comments from TCG member during the RFC/TCG Review Period: 2025-11-05 - 2025-12-17

WG chairs or vice chairs must read the Document, provide comments if any (including on topics not directly linked to the Group matters) or indicate that they have no comment.

IG chairs or vice chairs are also encouraged to do the same, althought their inputs are not compulsory.

TCG Chair & Vice Chair

Applications Working Group

Data Access Layer Working Group

Data Model Working Group

Distributed Services & Protocols Working Group

Registry Working Group

Semantics Working Group

Data Curation & Preservation Interest Group

Education Interest Group

High Energy Interest Group

Knowledge Discovery Interest Group

Operations Interest Group

Radio Astronomy Interest Group

Solar System Interest Group

Time Domain Interest Group

Standards and Processes Committee

TCG Vote : 2025-12-18 - 2026-01-08

If you have minor comments (typos) on the last version of the document please indicate it in the Comments column of the table and post them in the TCG comments section above with the date.

Group Yes No Abstain Comments
TCG        
Apps        
DAL        
DM        
DSP        
Registry        
Semantics        
DCP        
Edu        
KDIG        
Ops        
Radio        
SSIG        
TD        
StdProc         


<--  
-->

Revision 52025-11-13 - PatrickDowler

 
META TOPICPARENT name="WebPreferences"

DALI 1.2 Proposed Recommendation: Request for Comments

The changes in DALI-1.2 are primarily the inclusion of additional xtypes that can be used to add extra type information to columns (e.g. in VOTable, tap\_schema) and how such values are serialised. Also in this update: VOSI-availability is now optional as it is considered deprecated and is being removed from VOSI-next and OpenAPI components for some key DALI parameters are included in the specification. As always, various ambiguous statements have been clarified where needed.

Latest version of DALI-1.2 can be found at:

Reference Interoperable Implementations

The prototype CAOM-2.5 TAP service at CADC (https://ws.cadc-ccda.hia-iha.nrc-cnrc.gc.ca/caom25/argus) makes use of the following xtypes (some from previous standards):

Added:
>
>		 NOTE: this prototype service is currently offline but should be available again soon.
 
xtype num_columns standard
multishape 1 PR-DALI-1.2
timestamp 21  
adql:REGION 1 see note
clob 1 see note
multiinterval 3 PR-DALI-1.2
point 1  
uri 28 PR-DALI-1.2
shape 2 PR-DALI-1.2
uuid 14 PR-DALI-1.2
interval 10  
query: select xtype, count(*) as num_columns from tap_schema.columns where xtype is not null group by xtype.
note: the adql:REGION value is still used for ivoa.ObsCore.s_region; the clob value is used for ivoa.ObsCore.access_url

The production CADC TAP service (CAOM-2.4) make use of some previously proposed/discussed xtype values and will be updated to DALI-1.2 in the near future.

Implementation Validators

TOPCAT/STILTS: Validator and implementation updates to cover all DALI 1.2 xtypes as appropriate, available in unreleased version at http://www.star.bristol.ac.uk/mbt/releases/topcat/pre/topcat-full_dali12.jar:

  • Validation:
    • taplint new stage TYP checks that column metadata is consistent with xtype declarations (e.g. xtype="interval" columns have arraysize="2").
    • votlint/taplint checks VOTable column content is consistent with xtype declarations (e.g. xtype="uuid" values match xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
  • Implementation:
    • Topcat shape plotting upgraded to recognise new DALI xtypes range, shape, multishape, moc.

Comments from the IVOA Community during RFC/TCG review period: 2025-11-05 - 2025-12-17

The comments from the TCG members during the RFC/TCG review should be included in the next section.

In order to add a comment to the document, please edit this page and add your comment to the list below in the format used for the example (include your Wiki Name so that authors can contact you for further information). When the author(s) of the document have considered the comment, they will provide a response after the comment.

Additional discussion about any of the comments or responses can be conducted on the WG mailing list. However, please be sure to enter your initial comments here for full consideration in any future revisions of this document

Comments from TCG member during the RFC/TCG Review Period: 2025-11-05 - 2025-12-17

WG chairs or vice chairs must read the Document, provide comments if any (including on topics not directly linked to the Group matters) or indicate that they have no comment.

IG chairs or vice chairs are also encouraged to do the same, althought their inputs are not compulsory.

TCG Chair & Vice Chair

Applications Working Group

Data Access Layer Working Group

Data Model Working Group

Distributed Services & Protocols Working Group

Registry Working Group

Semantics Working Group

Data Curation & Preservation Interest Group

Education Interest Group

High Energy Interest Group

Knowledge Discovery Interest Group

Operations Interest Group

Radio Astronomy Interest Group

Solar System Interest Group

Time Domain Interest Group

Standards and Processes Committee

TCG Vote : 2025-12-18 - 2026-01-08

If you have minor comments (typos) on the last version of the document please indicate it in the Comments column of the table and post them in the TCG comments section above with the date.

Group Yes No Abstain Comments
TCG        
Apps        
DAL        
DM        
DSP        
Registry        
Semantics        
DCP        
Edu        
KDIG        
Ops        
Radio        
SSIG        
TD        
StdProc         


<--  
-->

Revision 42025-11-05 - GregoryMantelet

 
META TOPICPARENT name="WebPreferences"

DALI 1.2 Proposed Recommendation: Request for Comments

Added:
>
>
 The changes in DALI-1.2 are primarily the inclusion of additional xtypes that can be used to add extra type information to columns (e.g. in VOTable, tap\_schema) and how such values are serialised. Also in this update: VOSI-availability is now optional as it is considered deprecated and is being removed from VOSI-next and OpenAPI components for some key DALI parameters are included in the specification. As always, various ambiguous statements have been clarified where needed.

Latest version of DALI-1.2 can be found at:

Reference Interoperable Implementations

The prototype CAOM-2.5 TAP service at CADC (https://ws.cadc-ccda.hia-iha.nrc-cnrc.gc.ca/caom25/argus) makes use of the following xtypes (some from previous standards):

xtype num_columns standard
multishape 1 PR-DALI-1.2
timestamp 21  
adql:REGION 1 see note
clob 1 see note
multiinterval 3 PR-DALI-1.2
point 1  
uri 28 PR-DALI-1.2
shape 2 PR-DALI-1.2
uuid 14 PR-DALI-1.2
interval 10  
Changed:
<
<		query: select xtype, count(*) as num_columns from tap_schema.columns where xtype is not null group by xtype.
note: the adql:REGION value is still used for ivoa.ObsCore.s_region; the clob value is used for ivoa.ObsCore.access_url
>
>		query: select xtype, count(*) as num_columns from tap_schema.columns where xtype is not null group by xtype.
note: the adql:REGION value is still used for ivoa.ObsCore.s_region; the clob value is used for ivoa.ObsCore.access_url
  The production CADC TAP service (CAOM-2.4) make use of some previously proposed/discussed xtype values and will be updated to DALI-1.2 in the near future.

Implementation Validators

TOPCAT/STILTS: Validator and implementation updates to cover all DALI 1.2 xtypes as appropriate, available in unreleased version at http://www.star.bristol.ac.uk/mbt/releases/topcat/pre/topcat-full_dali12.jar:

  • Validation:
Changed:
<
<
    • taplint new stage TYP checks that column metadata is consistent with xtype declarations (e.g. xtype="interval" columns have arraysize="2").
    • votlint/taplint checks VOTable column content is consistent with xtype declarations (e.g. xtype="uuid" values match xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
>
>
    • taplint new stage TYP checks that column metadata is consistent with xtype declarations (e.g. xtype="interval" columns have arraysize="2").
    • votlint/taplint checks VOTable column content is consistent with xtype declarations (e.g. xtype="uuid" values match xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
 
  • Implementation:
    • Topcat shape plotting upgraded to recognise new DALI xtypes range, shape, multishape, moc.
Deleted:
<
<
 
Changed:
<
<

Comments from the IVOA Community during RFC/TCG review period: RFC_start_date - RFC_end_date

>
>

Comments from the IVOA Community during RFC/TCG review period: 2025-11-05 - 2025-12-17

  The comments from the TCG members during the RFC/TCG review should be included in the next section.

In order to add a comment to the document, please edit this page and add your comment to the list below in the format used for the example (include your Wiki Name so that authors can contact you for further information). When the author(s) of the document have considered the comment, they will provide a response after the comment.

Additional discussion about any of the comments or responses can be conducted on the WG mailing list. However, please be sure to enter your initial comments here for full consideration in any future revisions of this document

Changed:
<
<

Comments from TCG member during the RFC/TCG Review Period: TCG_start_date - TCG_end_date

>
>

Comments from TCG member during the RFC/TCG Review Period: 2025-11-05 - 2025-12-17

  WG chairs or vice chairs must read the Document, provide comments if any (including on topics not directly linked to the Group matters) or indicate that they have no comment.

IG chairs or vice chairs are also encouraged to do the same, althought their inputs are not compulsory.

TCG Chair & Vice Chair

Applications Working Group

Data Access Layer Working Group

Data Model Working Group

Distributed Services & Protocols Working Group

Registry Working Group

Semantics Working Group

Data Curation & Preservation Interest Group

Education Interest Group

High Energy Interest Group

Knowledge Discovery Interest Group

Operations Interest Group

Radio Astronomy Interest Group

Solar System Interest Group

Time Domain Interest Group

Standards and Processes Committee

Changed:
<
<

TCG Vote : Vote_start_date - Vote_end_date

>
>

TCG Vote : 2025-12-18 - 2026-01-08

  If you have minor comments (typos) on the last version of the document please indicate it in the Comments column of the table and post them in the TCG comments section above with the date.

Group Yes No Abstain Comments
TCG        
Apps        
DAL        
DM        
DSP        
Registry        
Semantics        
DCP        
Edu        
KDIG        
Ops        
Radio        
SSIG        
TD        
StdProc         


<--  
-->
Deleted:
<
<

Revision 32025-11-03 - MarkTaylor

 
META TOPICPARENT name="WebPreferences"

DALI 1.2 Proposed Recommendation: Request for Comments

Added:
>
>

 The changes in DALI-1.2 are primarily the inclusion of additional xtypes that can be used to add extra type information to columns (e.g. in VOTable, tap\_schema) and how such values are serialised. Also in this update: VOSI-availability is now optional as it is considered deprecated and is being removed from VOSI-next and OpenAPI components for some key DALI parameters are included in the specification. As always, various ambiguous statements have been clarified where needed.

Latest version of DALI-1.2 can be found at:

Changed:
<
<

Reference Interoperable Implementations

>
>

Reference Interoperable Implementations

  The prototype CAOM-2.5 TAP service at CADC (https://ws.cadc-ccda.hia-iha.nrc-cnrc.gc.ca/caom25/argus) makes use of the following xtypes (some from previous standards):
xtype num_columns standard
multishape 1 PR-DALI-1.2
timestamp 21  
adql:REGION 1 see note
clob 1 see note
multiinterval 3 PR-DALI-1.2
point 1  
uri 28 PR-DALI-1.2
shape 2 PR-DALI-1.2
uuid 14 PR-DALI-1.2
interval 10  
query: select xtype, count(*) as num_columns from tap_schema.columns where xtype is not null group by xtype.
note: the adql:REGION value is still used for ivoa.ObsCore.s_region; the clob value is used for ivoa.ObsCore.access_url

The production CADC TAP service (CAOM-2.4) make use of some previously proposed/discussed xtype values and will be updated to DALI-1.2 in the near future.

Changed:
<
<

Implementations Validators

>
>

Implementation Validators

 
Changed:
<
<		(If any, indicate here the links to Implementations Validators)
>
>		TOPCAT/STILTS: Validator and implementation updates to cover all DALI 1.2 xtypes as appropriate, available in unreleased version at http://www.star.bristol.ac.uk/mbt/releases/topcat/pre/topcat-full_dali12.jar:
Added:
>
>
  • Validation:
    • taplint new stage TYP checks that column metadata is consistent with xtype declarations (e.g. xtype="interval" columns have arraysize="2").
    • votlint/taplint checks VOTable column content is consistent with xtype declarations (e.g. xtype="uuid" values match xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
  • Implementation:
    • Topcat shape plotting upgraded to recognise new DALI xtypes range, shape, multishape, moc.
 
Deleted:
<
<
 
Deleted:
<
<
 

Comments from the IVOA Community during RFC/TCG review period: RFC_start_date - RFC_end_date

The comments from the TCG members during the RFC/TCG review should be included in the next section.

In order to add a comment to the document, please edit this page and add your comment to the list below in the format used for the example (include your Wiki Name so that authors can contact you for further information). When the author(s) of the document have considered the comment, they will provide a response after the comment.

Additional discussion about any of the comments or responses can be conducted on the WG mailing list. However, please be sure to enter your initial comments here for full consideration in any future revisions of this document

Comments from TCG member during the RFC/TCG Review Period: TCG_start_date - TCG_end_date

WG chairs or vice chairs must read the Document, provide comments if any (including on topics not directly linked to the Group matters) or indicate that they have no comment.

IG chairs or vice chairs are also encouraged to do the same, althought their inputs are not compulsory.

TCG Chair & Vice Chair

Applications Working Group

Data Access Layer Working Group

Data Model Working Group

Distributed Services & Protocols Working Group

Registry Working Group

Semantics Working Group

Data Curation & Preservation Interest Group

Education Interest Group

High Energy Interest Group

Knowledge Discovery Interest Group

Operations Interest Group

Radio Astronomy Interest Group

Solar System Interest Group

Time Domain Interest Group

Standards and Processes Committee

TCG Vote : Vote_start_date - Vote_end_date

If you have minor comments (typos) on the last version of the document please indicate it in the Comments column of the table and post them in the TCG comments section above with the date.

Group Yes No Abstain Comments
TCG        
Apps        
DAL        
DM        
DSP        
Registry        
Semantics        
DCP        
Edu        
KDIG        
Ops        
Radio        
SSIG        
TD        
StdProc         


<--  
-->
Added:
>
>

Revision 22025-10-31 - PatrickDowler

 
META TOPICPARENT name="WebPreferences"

DALI 1.2 Proposed Recommendation: Request for Comments

Changed:
<
<		Feel free to include here an introductory paragraph describing the DALI-1.2 being addressed here
>
>		The changes in DALI-1.2 are primarily the inclusion of additional xtypes that can be used to add extra type information to columns (e.g. in VOTable, tap\_schema) and how such values are serialised. Also in this update: VOSI-availability is now optional as it is considered deprecated and is being removed from VOSI-next and OpenAPI components for some key DALI parameters are included in the specification. As always, various ambiguous statements have been clarified where needed.
  Latest version of DALI-1.2 can be found at:

Reference Interoperable Implementations

Changed:
<
<		(Indicate here the links to at least two Reference Interoperable Implementations)
>
>		The prototype CAOM-2.5 TAP service at CADC (https://ws.cadc-ccda.hia-iha.nrc-cnrc.gc.ca/caom25/argus) makes use of the following xtypes (some from previous standards):
Added:
>
>
xtype num_columns standard
multishape 1 PR-DALI-1.2
timestamp 21  
adql:REGION 1 see note
clob 1 see note
multiinterval 3 PR-DALI-1.2
point 1  
uri 28 PR-DALI-1.2
shape 2 PR-DALI-1.2
uuid 14 PR-DALI-1.2
interval 10  
query: select xtype, count(*) as num_columns from tap_schema.columns where xtype is not null group by xtype.
note: the adql:REGION value is still used for ivoa.ObsCore.s_region; the clob value is used for ivoa.ObsCore.access_url

The production CADC TAP service (CAOM-2.4) make use of some previously proposed/discussed xtype values and will be updated to DALI-1.2 in the near future.

 

Implementations Validators

(If any, indicate here the links to Implementations Validators)

Comments from the IVOA Community during RFC/TCG review period: RFC_start_date - RFC_end_date

The comments from the TCG members during the RFC/TCG review should be included in the next section.

In order to add a comment to the document, please edit this page and add your comment to the list below in the format used for the example (include your Wiki Name so that authors can contact you for further information). When the author(s) of the document have considered the comment, they will provide a response after the comment.

Additional discussion about any of the comments or responses can be conducted on the WG mailing list. However, please be sure to enter your initial comments here for full consideration in any future revisions of this document

Comments from TCG member during the RFC/TCG Review Period: TCG_start_date - TCG_end_date

WG chairs or vice chairs must read the Document, provide comments if any (including on topics not directly linked to the Group matters) or indicate that they have no comment.

IG chairs or vice chairs are also encouraged to do the same, althought their inputs are not compulsory.

TCG Chair & Vice Chair

Applications Working Group

Data Access Layer Working Group

Data Model Working Group

Distributed Services & Protocols Working Group

Registry Working Group

Semantics Working Group

Data Curation & Preservation Interest Group

Education Interest Group

High Energy Interest Group

Knowledge Discovery Interest Group

Operations Interest Group

Radio Astronomy Interest Group

Solar System Interest Group

Time Domain Interest Group

Standards and Processes Committee

TCG Vote : Vote_start_date - Vote_end_date

If you have minor comments (typos) on the last version of the document please indicate it in the Comments column of the table and post them in the TCG comments section above with the date.

Group Yes No Abstain Comments
TCG        
Apps        
DAL        
DM        
DSP        
Registry        
Semantics        
DCP        
Edu        
KDIG        
Ops        
Radio        
SSIG        
TD        
StdProc         


<--  
-->

Revision 12025-10-29 - GregoryMantelet

 
META TOPICPARENT name="WebPreferences"

DALI 1.2 Proposed Recommendation: Request for Comments

Feel free to include here an introductory paragraph describing the DALI-1.2 being addressed here

Latest version of DALI-1.2 can be found at:

Reference Interoperable Implementations

(Indicate here the links to at least two Reference Interoperable Implementations)

Implementations Validators

(If any, indicate here the links to Implementations Validators)

Comments from the IVOA Community during RFC/TCG review period: RFC_start_date - RFC_end_date

The comments from the TCG members during the RFC/TCG review should be included in the next section.

In order to add a comment to the document, please edit this page and add your comment to the list below in the format used for the example (include your Wiki Name so that authors can contact you for further information). When the author(s) of the document have considered the comment, they will provide a response after the comment.

Additional discussion about any of the comments or responses can be conducted on the WG mailing list. However, please be sure to enter your initial comments here for full consideration in any future revisions of this document

Comments from TCG member during the RFC/TCG Review Period: TCG_start_date - TCG_end_date

WG chairs or vice chairs must read the Document, provide comments if any (including on topics not directly linked to the Group matters) or indicate that they have no comment.

IG chairs or vice chairs are also encouraged to do the same, althought their inputs are not compulsory.

TCG Chair & Vice Chair

Applications Working Group

Data Access Layer Working Group

Data Model Working Group

Distributed Services & Protocols Working Group

Registry Working Group

Semantics Working Group

Data Curation & Preservation Interest Group

Education Interest Group

High Energy Interest Group

Knowledge Discovery Interest Group

Operations Interest Group

Radio Astronomy Interest Group

Solar System Interest Group

Time Domain Interest Group

Standards and Processes Committee

TCG Vote : Vote_start_date - Vote_end_date

If you have minor comments (typos) on the last version of the document please indicate it in the Comments column of the table and post them in the TCG comments section above with the date.

Group Yes No Abstain Comments
TCG        
Apps        
DAL        
DM        
DSP        
Registry        
Semantics        
DCP        
Edu        
KDIG        
Ops        
Radio        
SSIG        
TD        
StdProc         


<--  
-->
View topic | History: r8 < r7 < r6 < r5 | More topic actions...
 
This site is powered by the TWiki collaboration platform Powered by Perl This site is powered by the TWiki collaboration platformCopyright © 2008-2026 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback